New products in Frankfurt

New products in Frankfurt

Lynx Pro Audio will be exhibiting at Prolight & Sound Hall 8 Stand K70 with our biggest stand ever. We will also be releasing more new products than ever before with the new CXA Line array, the GXR touring series, HR Installation series and our IONIC columns, as well as the new power amplifiers HPX and RS series. With only some days to go to prolight+sound take a look at what we will be showing this year in Frankfurt.

 

The CXA line source system

The CXA is intended as a flexible solution for both fixed installations and touring, where wide coverage is required from as few line array elements as posible. Designed to be flown either horizontally or vertically, this line source system can be used as a single element or a combination of a máximum of 4 cabinets in array configuration delivering 72º coverage in the vertical plane. The CXA models are self-powered (Class D) with 1400W amplification and controlled by DSP.

CXA family

 

 

The multipurpose GXR cabinets

Both compact and powerful, the GXR Series is our latest solution for portable, lightweight, powered speakers. Designed as a more economical solution to the ADP Series, the GXR cabinets retain all the features and delivers all the power of a truly first class touring series. All models are selfpowered (Class D) with 1400 W amplification each, controlled by DSP.

GXR_family

 

Speaker columns, ionic series

Our answer to light, portable or permanent installation column speakers.  The ionic series comprises two full-range modular columns and two subwoofers. These columns are very low profile, versatile, aesthetically pleasing and are designed for reverberant installations where inteligible, clear voice reproduction is paramount and where a low profile, discreet column is required. They are very easy to install and can be done so either horizontally or vertically. The full-range columns can be powered from the active subwoofers and also offer various preset configurations from the integrated DSP.

ionic family

 

 

The HR Series, for installation

The HR Series has been designed to offer the utmost sound quality for installations. The range consists of 10 different two-way full range and 4 sub-bass options, all delivering high output whilst retaining exceptional clarity and efficiency with superior reliability and sonic performance. All full range models are either bi-amp or passive selectable. For sub-bass reinforcement two different dual 18″ are also available.

 

HR family

 

 

 

 

 

 

New touring amplifiers HPX

New touring amplifiers HPX

The new generation of Lynx Pro Audio touring amps is now available. There are 4 top class amplifiers with power output from 4,600 to 12,000 W, all of them offering four channels & ready for tough touring conditions.

 

All the HPX amps offer full digital control with extra large LCD, including channel temperature and output level monitor in the display. There are 25 position Gain, Bridge mode, input links, ICL (intelligent clip limiter) and other options configurable from the front panel. The HPX amps are at the forefront of audio design, offering a powerful, reliable and lightweight amplifier designed to deliver superior sound quality. The HPX models offer the latest generation of switching power supply technology and an advanced protection pack including the Power Management System (PMS) the Intelligent Clip Limiter (ICL), Soft-start, Turn-on Turn-off transients, Over-heating, DC, RF, Short-circuit and many more. A fully programmable Digital Signal Processor module is optional, so you can save more than 50 presets directly into the amp configuring  input and output delay, EQ, crossover, etc.

 

The touring world is not a trivial matter for an amplifier to work in, the HPX units are strong and offer dual oversized regulated SMPS with Power Factor Correction front end to deliver full performance independently of main status or load requirements. Furthermore the cooling system includes air filters easily removable. For more technical details click here.

 

hpx-front-back

Lynx Pro Audio presents the new RS series Amplifiers

Lynx Pro Audio presents the new RS series Amplifiers

A new range of amplifiers is now available from Lynx Pro Audio. There are seven new two or four channel models with power outputs from 1000 to 4000 W.

 

The new RS series power amplifiers represent the best compromise between economy and performance. This cost-effective range is designed for professionals requiring quality, reliability and value.

 

RS Series amps are Class H and offer unmatched audio quality. With a compact package of 25cm deep and its ultra light weight (6 kg/13 lbs) the RS amps take advantage of the latest improvements in electronic assembly.  All RS Series models offer the latest generation of switching power supply technology and an advanced protection pack including the Power Management System (PMS) the Intelligent Clip Limiter (ICL), Soft-start, Turn-on Turn-off transients, Over-heating, DC, RF, Short-circuit and much more.

 

The amplifiers can operate on two different configurations: Dual or Bridge. For more technical details click here

 

RS4

 

 

Lynx at Pro Light + Sound in Frankfurt

Lynx at Pro Light + Sound in Frankfurt

Lynx Pro Audio products were exhibited at Prolight & Sound held in Frankfurt from May 12 to 15.

 

Lynx Pro Light

 

On display was a selection of Lynx Pro Audio cabinets, with a stack of the LX-V12 line array, ADP stage monitors ADP-212M and ADP-12M, the compact sub unit ADP-12S with a ADP-26 in satellite configuration and the multipurpose enclosure GR-12.

PLS_booth

The Lynx booth was shared with PAN music, German distributor of the brand.

The exhibition gave Lynx the chance to meet existing customers and distributors as well as welcome new ones to the team.

New cardioid presets for LX-218S

New cardioid presets for LX-218S

Sub-bass cardioid configurations increase the front pressure and directivity, ensuring that rear sound does not spill

on to the stage behind the sub-bass. Seven cardioid configurations are now available for the sub enclosure LX-218S.

With these new configurations you can obtain up to 24 dB of attenuation behind the cabinet between 30Hz and 100Hz,

and between 1 and 1.5 dB more SPL up front.

Here is just one example of the seven configurations, in this case we are using the Mode 6:

 

modo6c

 

In this case for A cabinets you have to select the new preset 10 and for B cabinets use the new preset 16.

 

modo6l

modo6r

 

In the first image you can see the LX-218S polar response with cardioid Mode 6 at 60 Hz. On the second you have the

same configuration but with the cabinet B muted. You can appreciate the differences behind the enclosures, with a

big attenuation in the first image. 

 

LX-218S

 

LX-218S units existing on the market manufactured from January 2012 can be updated with these new presets. Just

connect your subwoofer to the computer using the Cabinet Updater software using a standard USB cable. You will

have all these new presets available in the DSP core of your cabinet very quickly. And then, from the buttons below

the display on the cabinet’s back panel you will be able to select these new seven cardioid presets.

 

Click here to see all cardioid configurations available