Lynx Pro Audio appoints Pieter Van de Velde as International BDM

Lynx Pro Audio appoints Pieter Van de Velde as International BDM

Lynx Pro Audio is delighted to announce the recruitment of Pieter Van de Velde as International Business Development Manager. Pieter takes responsibility for the expansion of the brand in the international network and the ongoing development of its sales.

Ben Sinclair, CEO for Lynx Pro Audio, commented: “We are very excited to have Pieter working with us. His experience, knowledge and skills will certainly be a big asset to the growth of the brand.”

Van de Velde commented: “Really looking forward to the exciting challenge of increasing the Lynx Pro Audio profile and developing the distributor network across the regions.

Pieter has many years of experience in the entertainment business as a Trader, Owner, Brand Manager, Sales Team Leader and International Business Development. His credo, “The satisfaction of giving nothing less than your maximum,“ perfectly defines his energetic and pro-active world-view. He is eager to begin representing the Lynx Pro Audio and supporting partners to develop customised solutions.

With Pieter’s appointment, Lynx Pro Audio gets a new team member and opens up the doors to new challenges and goals. The company is expecting to expand steadily in the following years and Pieter will be a key figure in helping to bring awareness about the brand worldwide.

We are excited about his incorporation and on behalf of the entire Lynx Pro Audio team we welcome him.

KR series, an ideal solution for conference, KTV rooms and clubs

KR series, an ideal solution for conference, KTV rooms and clubs

Lynx Pro Audio introduces the new KR series, a line of passive two-way loudspeakers specially designed for installations where high volume is required whilst delivering excellent vocal clarity with low distortion.

The two full-range models belonging to the KR series feature two-way passive 10″ and 12″ versions, with a 1″ driver mounter on a 90º x 60º rotatable horn.

KR cabinets are ideal for a wide range of fixed applications, such as KTV rooms, conference halls, houses of worship as well as discos and clubs.

The double port located at the rear of the enclosure creates increased bass frequency response. When installed close to a wall, it creates a reflection that extends the low frequency response of the system, creating extra bass boost.

Lynx Pro Audio KR-10 cabinet, front and rear view

KR-10

Lynx Pro Audio KR-12 cabinet, front and rear view

KR-12

The KR-10 cabinet consists of a 10” (2.5” voice coil) LF transducer with Double Asymmetric Rolls Technology (DAR) and waterproof cone. The 1” HF compression driver delivers excellent sonic quality. It has an exceptional dynamic range and produces even the most complex signals with depth and definition and is mounted on a 90º x 60º rotatable horn. With a 96 dB sensitivity and a max. SPL of 122 dB / 128 dB peak, rated power of 300W AES (600W program, 1200W peak). The fittings include 14 x M8, ergonomic handle on the back position, 4 x M6 U-bracket, 6 x M6 wall bracket and a 35 mm top hat.

The KR-12 consists of a 12” (3” voice coil) LF transducer with triple cloth surround and total waterproof cone treatment. The 1” HF compression driver delivers excellent sonic quality. It has an exceptional dynamic range and produces even the most complex signals with depth and definition and is mounted on a 90º x 60º rotatable horn. With a 97 dB sensitivity and a max. SPL of 124 dB / 130 dB peak, rated power of 500W AES (1000W program, 2000W peak). The fittings include 14 x M8, ergonomic handle on the back position, 4 x M6 U-bracket, 4 x M6 wall bracket and a 35 mm top hat.

Constructed from MDF and coated in high resistant polyurea paint, giving them greater durability. A wide range of dedicated accessories allows the installation of these loudspeakers in all types of set-ups: ceiling or wall mounted, on a speaker stand or as a satellite with a subwoofer.

Although the KR series can be used without a processor we recommend that the cabinet presets are applied for maximum optimization and performance. These presets are available on the full range of ARK processors and on the brand’s amplifiers with built-in DSP.

NEEC IBERIA, new distributor for Lynx Pro Audio in Spain and Portugal

NEEC IBERIA, new distributor for Lynx Pro Audio in Spain and Portugal

Lynx Pro Audio and NEEC AUDIO BARCELONA, manufacturer of the popular brand ECLER, have signed a distribution agreement for Spain and Portugal where as of now all Lynx Pro Audio products will be represented by NEEC IBERIA throughout the entire Iberian peninsular, including all the Spanish and Portuguese islands.

Ben Sinclair, Director of Lynx Pro Audio comments, “NEEC IBERIA has a very professional team. They offer in-depth product knowledge and a high level of support and service. They also have the full support of the ECLER commercial network and an excellent distribution capacity that covers the entire peninsula, the islands and Ceuta and Melilla. We are sure that Lynx Pro Audio products will be very well represented both in Spain and Portugal and that our users will be able to continue trusting in Lynx Pro Audio , from now on through the NEEC IBERIA network”.

NEEC IBERIA has more than 50 years experience distributing ECLER products in the pro AV industry. The ISE trade fair held in Barcelona this month witnessed the start of this new partnership between Lynx Pro Audio and NEEC IBERIA. You can contact them through this form or by calling the following number directly: (+34) 932 238 402

Picture taken in ISE trade fair. Neec Audio’s David Haro (L) with Jesús Fuentes (R), Lynx Pro Audio Product Manager.

NEEC IBERIA thus becomes a benchmark in the distribution of professional audio products in Spain and Portugal, bringing in-depth knowledge of the product together with the highest level of service, backed up the full support of ECLER’s sales network.

Lynx Pro Audio introduced new products at ISE in Barcelona

Lynx Pro Audio introduced new products at ISE in Barcelona

Lynx Pro Audio attended ISE 2022 between 10th – 13th May, the most important A&V trade fair in the world. Held in early February for the third time in Barcelona, this year’s ISE has established itself as the event we all hold in our memories: without restrictions, lively and with plenty of networking.

We are growing steadily, and once again we have had a slightly larger stand than the previous year. This edition we have introduced a whole range of products that will be available in the not too distant future, including new amplifiers, processors and enclosures.

ISE 2023 has been a perfect opportunity to reconnect with many of our customers. This time we had visitors from all over the world,  as a result of the opening of many countries and the end of restrictions. We noticed that the interest in Lynx Pro Audio keeps on growing. We have seen a lot of new faces at our stand and a lot of interest in our products.

At the same time, the new partnership agreement between Lynx Pro Audio and NEEC IBERIA started officially during the trade fair, boosting the distribution of Lynx Pro Audio products in Spain and Portugal.

What’s new

Lynx Pro Audio brings new developments in acoustics, electronics, signal processing, etc.

GTX amplifiers, ideal for touring

The new GTX amplifiers are 4-channel, extremely high power level amplifiers designed to withstand the rough requirements of the touring market. With outstanding, high efficiency, these amplifiers have been equipped with a quality FIR-DSP with high performance 96kHz DSP processing and a large IPS display with a touch panel user interface. 4 different models are available, from 5000 W up to 20000 W.

Advanced Audio Power Control Management has been implemented in the design of the GTX series. This enables the user to configure the division of power between the channels via the DSP enabling them to obtain maximum power through just one single channel if desired. Optional Networking (AES67) and AES3 Digital inputs are also available.

CPS, new coaxial point source system

In terms of acoustics, the new CPS point source system stands out. There is one full range cabinet available, CPS-214 together with one sub-bass unit, CPS-18S. The CPS (Coaxial Point Source) Series is our brand new high power, point source system, that will be available shortly.

Fot the top, we have the CPS-214 enclosure, an extremely compact & powerful 3-way, self-powered (6000 W Class-D with PFC), DSP integrated coaxial point source element. With dual high power 14″ neodymium transducers and a unique 2″ Exit throat (HF 1.75″ voice coil/ MF  3.5″ voice coil) coaxial neodymium compression driver. For the low frequencies, each CPS-18S is a sub-bass element designed to be used in unison with the coaxial CPS-214 point source module. This is a compact & extremely powerful, self-powered (3000 W Class-D with PFC), DSP integrated subwoofer unit in band pass configuration, with a 18″ (4″ voice coil) neodymium transducer.

Total system control is also achieved through our 3D prediction software (Rainbow 3D) working together with our remote system management platform (OCS). These cutting edge softwares together with the CPS technology provides the most optimum and precise listening experience to every ear in the audience.

Luka series: a new generation of processors

Lynx Pro Audio has unveiled its future LUKA series, a range of 3 models that represent Lynx Pro Audio’s technology and are the successor to the ARK processors. Luka will offer units with 2 AES3 inputs; 2 or 4 analogue inputs and up to 8 outputs. The new LUKA processors will be available after the summer.

Juno weather-resistant loudspeakers at Sundays Beach Club

Juno weather-resistant loudspeakers at Sundays Beach Club

Sunday Beach Club is a venue situated on one of the most beautiful beachfronts in Bali (Indonesia). There you can enjoy the crystal clear water, aquatic activities, massages, sunset bonfires and live music parties. The objective is to make you experience a day of complete relaxation. At Sundays Beach Club, every day’s a Sunday.

Our Indonesian distributor (Melodia) and their AV consultant partner Sontastic have been tasked with installing the Sundays Beach Club, in the Uluwatu region. Several weather-resistant Juno cabinets have been set up in the beach zone, since these loudspeakers can withstand salt, rain and have UV protection. Their high durability, superior performance and modern design makes them the ideal candidates.

In this club, customers have the chance to fully relax and disconnect in this beautiful location. The beach is fired up with bonfires daily at sunset, enjoying some toasted marshmallows. If you need more privacy, you can rent an exclusive private bungalow too.

For the more adventurous people, kayaks, stand-up paddle boards, snorkeling or swimming are also offered, with all the necessary equipment provided by the club.

On weekends, a festive atmosphere is created in the afternoon until closing time with live music and DJs.

Featured products

JN-6T

6″ low/mid woofer + 1″ HF driver with line transformer

More details

JN-8T

8″ low/mid woofer + 1″ HF driver with line transformer

More details

Fixed installations

Juno series at Mamaka Hotel in Bali, Indonesia

Bali seems to be the perfect place for our weather-resistant small enclosures Juno series. Our Indonesian distributor (Melodia) and their AV consultant partner Sontastic have been tasked with installing the Mamaka Hotel…

Read more

Time traveling loudspeakers at Voltereta Kioto

Voltereta Kioto is a restaurant inspired on the Japanese city of Kyoto. Crossing the doors of any Voltereta means entering a journey to a new destination…

Read more

Villa Westend in Haarlem (Netherlands)

With its own private beach just a few miles away from the centre of Amsterdam and overlooking Harleem, Villa Westend is quite unique. It is the ideal location for both business and pleasure…

Read more