XT Series
Amplifiers
The XT series is a new generation of amplifiers offering high voltage output for high headroom sound, with 64 bit double-precision 96kHz DSP processing, and an advanced power management to squeeze the last watts out of your speakers.
It also offers similar power per channel in any impedance, exceptional power sharing in asymetrical loads and a powerful and fast response cooling system.
The XT series has digital control with an extra large IPS display and touch screen panel user interface, making it easier and faster to use.
The DSP management user functionalities include input routing matrix analog, input EQ section with 8 filters and 20 memories, input EQ user section, system preset selection, a snapshot library management with up to 20 presets and master control groups.
The XT series has two Ethernet ports for daisy chain connection and access to the OCS software, designed to monitor the amplifiers in real time. These amplifiers are available with Networking AES67 upon request.
Technical Data
XT-6K | XT-10K | |
| Number of channels | ||
| 4 | 4 | |
| Total output power | ||
| 6000 W | 10000 W | |
| Output power | ||
| @ 8 Ohms | 4 x 1100 W 1 x 1200 W | 4 x 1600 W 1 x 1800 W |
| @ 4 Ohms | 4 x 1500 W 1 x 1900 W | 4 x 2500 W 1 x 3000 W |
| @ 2 Ohms | 4 x 1450 W 1 x 1450 W | 4 x 2500 W 1 x 2500 W |
| @ 8 Ohms Bridged | 2 x 3000 W | 2 x 5000 W |
| @ 4 Ohms Bridged | 2 x 2900 W | 2 x 5000 W |
| Hi-Z 100V | 4 x 800 W | 4 x 2500 W |
| Hi-Z 70 V | 4 x 1500 W | 4 x 2500 W |
| Max output voltage | ||
| 144 V peak | 176 V peak | |
| Max output current | ||
| 38 A peak | 50 A peak | |
| Total Harmonic Distortion | ||
| <0.05% | <0.05% | |
| Voltage Gain | ||
| 26 dB to 44 dB (1 dB step) | 26 dB to 44 dB (1 dB step) | |
| SNR | ||
| 106 dB | 107.5 dB | |
| Required AC Mains | ||
| Operating Voltage (50 Hz – 60 Hz) | 170V – 265V AC / 90V – 140V AC | 170V – 265V AC / 90V – 140V AC |
| 1/8 Rated Power (@230V, 4 Ohms) | 15 A | 16 A |
| Dimmensions | ||
| W x H x D (mm) | 483×89×320 | 483×89×320 |
| W x H x D (inches) | 19 x 3.5 x 12.5 | 19 x 3.5 x 12.5 |
| Weight | ||
| Net | 8.5 Kg / 18.7 lbs | 8.5 Kg / 18.7 lbs |
| Protections | ||
| Soft-start, Turn-on Turn-off transients, Multing at turn-on, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply, ICL™, PMS™ and SSP™ | ||
More features
DSP specifications
Overall:
- High performance 96 KHz/24 bits AD/DA converters
- 64 bit double-precision 96 KHz DSP process
- 0.85 ms minimum process latency time
- Custom FIR process up to 1000 taps
- Networking (AES67) and AES3 input versions
Input Section (x4):
- Gain, Mute and Phase inversion
- Input Delay: Up to 114 meters (333 ms)
- Input EQ: 16 filters (Param., Shelving, LP, HP, BP, SB, AP)
Output Section (x4):
- Crossover Filters: FIR and IIR (up to 48dB/oct, Butterw./LR/Bessel)
- Output Delay: 0 to 31 meters (90ms) per channel
- Output IIR EQ: 12 filters per channel (Param., Shel, LP, HP, BP, SB, AP)
- Output FIR EQ: 20 filters per channel (Parametric, Shelving, LP,HP, BP, SB, PA), or Custom. Up to 1000 taps
- RMS and Peak limiter per channel
Communications:
- Two ports Ethernet switch for daisy chain connection
- UBS 2.0 Type B port
Miscellaneous:
- 20 User preset memories library
- 20 User snapshot memories library
- Manufacturer/User passwords
- User control groups for virtual Equalization, Gain and Delay
- Zone management for library, and alerts information
- Smaart ® analysis software integration
DSP management using OCS and amplifier display
Two general working modes: User and Advanced
User functionalities:
- Input Routing matrix Analog/Networking AES67/AES3
- Input EQ section with 8 filters and 20 memories
- Input EQ Use section, predefined by the manufacturer
- System Preset selection predefined by the manufacturer (Locked/Unlocked)
- Snapshot library management up to 100 pre-sets
- Master Control Groups
Advanced functionalities:
- Input EQ Mode section creation, up to 20 presets
- Ways routing section (Locked/Unlocked)
- IIR EQ section: XOver, Gain, Delay, and 7 EQ filters
- FIR EQ section: linear phase XOver and EQ filters, or custom up to 1000 taps
- RMS and Peak Dynamic control
- Snapshot library management up to 100 presets (Locked/Unlocked)
- System Preset library management up to 100 presets
- 5 Security levels definition to limit final user functionality
 | Home screen Main screen with the following options: |
 | DSP Edit screen · Input source select · Input channel select · User input name label · Input process select · User EQ select · Group process values · Channel Join · System select · Use select · Way select |
 | User EQ screen · Input level process · Select user input gain · Select user delay value · Input mute · Input Signal Polarity · User EQ adjust per channel |
 | EQ screen: · 6 parametric EQ · High-pass filter · 16 EQ types selection · Gain, Q and Frequency control · General EQ Bypass |
