GR-12

 

High Output, self powered (class D switch mode power supply), two-way cabinet.
Consists of a 12″ (3″ voice coil) neodymium magnet transducer with and a 1″ compression driver with a titanium diaphragm mounted on a 80ºH x 60ºV constant directivity elliptical horn.
DSP (FIR technology) controlled with 1000W amplification, 133dB SPL.

Applications

Conference
Theatres
Live Sound / Events
Stage monitor
Portable sound reinforcement
Compact voice reinforcement

 

 

Specifications 
ComponentsLF/MF 12″ Neodymium + 1″ exit throat titanium diaphragm HF driver
Frequency range50 Hz – 20 KHz
Frequency Response55 Hz – 18 KHz (+/-3 dB)
Max. SPL130 dB / 133 dB peak
Coverage angle80º H x 60º V
Power Amplifier1000 W Class D with Switching Power supply
LF/MF amplifier1 x 500 W
HF amplifier1 x 500 W
Processing56 bit Lynx DSPB-22 with FIR filters
Cabinet adjustmentSide panel LCD
Internal ControlsTemperature sensor, Fan speed / Online Control OCS system
Control ConnectionsXLR / Ethernet (OCS) optional
AC Power230V / 115V selectable. 50/60 Hz 5A
AC Connections16A Neutrik Powercon with link output
Material15mm Premium birch plywood
FinishHigh resistant water-based black paint and foam protector
Dimensions (H x W x D)670 x 399 x 388 mm
Weight24 kg (53 lbs)

 

The versatile, portable GR-12 has been designed to offer the utmost sound reinforcement reliability, incorporating the latest acoustical and electronical technology and delivering incredible,dynamic sound. The GR-12 is a selfpowered, DSP (FIR technology) integrated cabinets designed to be a truly multi-purpose cabinet.

The GR-12 is a high power, two-way full range cabinet providing exceptional performance. For the low-mid frequencies it uses one 12” neodymium (3” copper voice coil) transducer with ventilated voice coil for reduced power compression. The high frequencies are looked after by a 1” compression driver with a (44mm voice coil) titanium diaphragm mounted on an 80ºH x 60ºV constant directivity die-cast aluminium elliptical horn. The GR-12 is powered with a total of 1000W of class D amplification, 500W for the low/mid frequencies and 500W for the high frequencies. Each cabinet has a DSP integrated for system protection and optimization.

The compact GR-12 has an unbeatable power to size ratio, there is no need for external amplification racks, is very light weight and is the ideal solution for portable or fixed sound reinforcement. A variety of rigging options make the GR-12 easy to set-up in minimal time. To extend the low frequency response, the GR-18S is recommended.

 
Bi-amplified Class D with switching power supply. 1000W power module (500W for the LF/MF and 500W for the HF).
 
The amplification far exceeds the transducers needs thus resulting in high output, high damping factor and extremely low levels of distortion.
 
The module is also equipped with extensive protection circuitry including power limiters, thermal shutdown, short circuit & overload and clip limiter.
 

 

[ezcol_1half]DSP[/ezcol_1half][ezcol_1half_end]ocs-icon[/ezcol_1half_end] 

 

The cabinets offer Digital Signal Processor integrated and Online Control System

 

Check more details

Click Here

 

For the low-mid frequencies it uses one 12” with neodymium magnet group (3” copper voice coil) transducer and ventilated voice coil gap for reduced power compression and improved heat dissipation.

The high frequencies are looked after by a 1” compression driver with a (44mm voice coil) titanium diaphragm mounted on an 80ºH x 60ºV constant directivity die-cast aluminium elliptical horn. Ventilated Titanium diaphragm for the HF driver increasing the life of the components with low distortion and remarkable improvements in mid-high frequency reproduction. Mounted on a 80º x 60º constant directivity elliptical aluminium horn with very high structural rigidity, optimum heat transfer and low distortion. A spherical wave-front, avoids reflections and other disadvantages normally associated with diffraction horns.

 

Accessories

 

AGR-6
 
AGR-6
M6 eye bolt for the GR-12
 
TU-C01
 
TU-C01
35mm connecting pole for satellite combination between sub units and GR-12
 
SB-02
SB-02
35mm lightweight aluminium stand for the GR-12
Wb-03
WB-03
Wall bracket for the ADP-15 for top hat insertion
FC-LXF6
FC-GR12
Flight case for 2 x GR-12

 

 

 

 

Phase ResponsePhase Response GR12

 

Dimensions

LYNX_ GR-12_2D

Descarga nuestra Guía para expertos:

Cómo posicionar tus subgraves para conseguir los mejores resultados

Con esta sencilla Guía gratuita aprenderás lo siguiente:

✓ Cómo evitar lóbulos de presión y efectos pasillo con cancelaciones no deseadas

✓ Ventajas de las configuraciones en línea y el arco electrónico

✓ Detalles técnicos y fórmulas que te ayudarán a elegir la mejor opción en cada evento

Consentimiento para recibir la newsletter

Ya puedes descargar la guía