GXR-LA210A
Powered line array
Compact, self-powered class D, two way line array equipped with two 10″ speakers (2″ voice coil). For the High frequencies it uses a 1.4″ output compression driver coupled to a waveguide (100°H x 10°V). It delivers high power levels from a very compact format.
Also available in bi-amp.
Description
The GXR-LA210A is the ideal solution for install projects and live events where a powerful but compact line array is required.
The GXR-LA210A is a self-powered (Class D), two-way enclosure that delivers high power levels from a very compact format. It uses two 10″ (2″coil) speakers for the Low/Mid frequencies. For the high frequencies it uses a 1.4″ output compression driver coupled to a waveguide offering 100° H x 10° V coverage.
The system is very easy to use and can be controlled without the need for any external amps. To extend the low frequency response there are 2 options. The GXR-D15A is designed to be flown or stacked in perfect combination with the GXR-LA210A and when extreme low frequencies are required, the GXR-D18A is recommended.
The GXR-LA210A has a selection of rigging hardware & accessories available: Flying frame, transport dolly, nylon protection cover, rain hood, etc.
Perfectly suited for:
| → Outdoor events | |
| → Houses of worship | |
| → Auditoriums | |
| → Large stadiums / arenas | |
| → Interior live PA | |
| → Theatres |
Technical Data
Components | LF: 2 x 10″, 2″ voice coil, Malt Cross Cooling System |
HF: 1.4″ exit throat, 3″ voice coil with titanium diaphragm | |
| Frequency Range | 60 Hz – 20 KHz (-10dB) |
Frequency Response | 68 Hz – 18 KHz (± 3dB) |
| Max SPL | 135dB |
Coverage Angle | 100º H x 10 º V |
| Power | 1400W Class D with switching power supply & PFC |
LF Amplifier | 1 x 800 W RMS, 1600 W peak |
| HF Amplifier | 1 x 600 W RMS, 1200 W peak |
Processing | Internal Lynx Processor DSPB-FL. |
| Control | User control interface with 2.8″ IPS screen |
Control Connections | Ethernet (OCS) / USB (DSP updating) |
Input | Analog / AES3 (optional) |
| AC Power | 90 – 264V. 50/60 Hz with PFC |
AC Connections | 16A Neutrik powerCon TRUE1 TOP with looping output |
| Finish | Polyurea coating, black colour |
Material | 15 mm premium birch plywood |
| Dimensions | 298 x 790 x 436 mm (H x W x D) |
Weight | 31 kg (68.2 lbs) |
DSP configuration
DSP configurationDSP module configuration panel
On the back pannel of the cabinet you will find the digital control area. From the compact joystick located below the screen you are able to configure the basic adjustment functions of the internal DSP.
Just move the joystick to select the icons on the left of the screen. You can enter into the following functions: Home, settings, folder, configuration and information. Please note that you must apply the desired configuration in each one cabinet and requires electrical power to work.
If changes are not made the display will automatically dim to avoid unnecessary light in situations where light is not wanted. To re-activate the light simply press the joystick.
The following screens are an example and may vary slightly for each cabinet.
Configuration panel:
 | HOME On the main screen you can see the cabinet’s input and output: • Input: You can see a vumeter with the input level and a clip signal. • Output: You have a vumeter with the output level (0 dBu is the amp’s maximum level) You can check the compressor and control the dynamic activity. |
 | SETTINGS This panel allows you to change the gain, polarity, mute and the delay for the inputs. You also have the possibility of putting a high pass, changing the type of filter, frequency and order. |
 | FOLDER The folder screen shows you the name of the preset and its description. Using the joystick you can change the preset. |
 | CONFIGURATION This screen is to configurate Ethernet. You can choose automatic or manual. You can also configure the screen saver. And here you have the input selection. You can choose between analog or AES3 for channel 1 or channel 2. |
 | INFORMATION The last screen shows you some general information regarding the cabinet’s components. Here you can see the cabinet model, its serial number, DSP firmware and hardware versions, amp module model with hardware version, as well as the accelerometer status. |
Watch the following TUTORIAL to understand how it works:
DSP module configuration panel
On the back panel of the cabinet you will find the digital control area. From the compact joystick located below the screen you are able to configure the Basic adjustment functions of the internal DSP.
Just move the joystick to select the icons on the left of the screen. You can enter into the following functions: Home, settings, folder, configuration and information. Please note that you must apply the desired configuration in each one cabinet and requires electrical power to work.
If changes are not made the display will automatically dim to avoid unnecessary light in situations where light is not wanted. To re-activate the light simply press the joystick.
The following screens are an example and may vary slightly for each cabinet.
HOME
On the main screen you can see the cabinet’s input and output.
• Input: You can see a vumeter with the input level and a clip signal.
• Output: You have a vumeter with the output level (0 dBu is the amp’s maximum level) You can check the compressor and control the dynamic activity.
SETTINGS
This panel allows you to change the gain, polarity, mute and the delay for the inputs.
You also have the possibility of putting a high pass, changing the type of filter, frequency and order.
FOLDER:
The folder screen shows you the name of the preset and its description.
Using the joystick you can change the preset.
CONFIGURATION:
This screen is to configurate Ethernet. You can choose automatic or manual. You can also configure the screen saver.
And here you have the input selection. You can choose between analog or AES3 for channel 1 or channel 2.
INFORMATION:
The last screen shows you some general information regarding the cabinet’s components.
Here you can see the cabinet model, its serial number, DSP firmware and hardware versions, amp module model with hardware version, as well as the accelerometer status.
Watch the following TUTORIAL to understand how it works:
More features
Hardware for GXR-LA210A
 | EnclosureThe GXR-LA210A cabinet is constructed from 11-ply premium birch plywood (15mm thickness) and finished with high-resistant water based black paint. |
 | Internal designThe internal structure of the GXR-LA210A is heavily braced for greater longevity and all parts are assembled on metal inserts with metric screws. The amplification modules & DSP are housed in a separate chamber to the drivers avoiding excessive heat & vibration, thus delivering greater efficiency and reliability. |
 | Rear panelThe powder coated steel rear panel contains all connections and houses the GXR-LA210A amplification modules and DSP, is easily accessible and housed separately from the drivers for increased reliability and efficiency. |
 | GrillThe GXR-LA210A has a heavy duty, powder coated front grille with a special acoustic rear fabric to protect the transducers against dust and dirt. |
 | HandlesTwo handles are located on each side of the GXR-LA210A enclosure to facilitate transport, positioning and loading of the cabinets. |
 | RiggingBuilt-in flying points are located on each side of the enclosure, to link the cabinets together. The rear pannel integrates the flying hardware in order to splay angles, from between 0° to 10° with 1° step increments to create the desired curve. |
 | TransportThe cabinet is easy to transport thanks to its dedicated dolly and a protective nylon cover is also available to protect the enclosure and keep it clean on tour. |
Accessories for GXR-LA210A
 | SV-GXR Flying frame and stacking system for GXR-LA210A/GXR-D15A You can use this frame for ground stack or rigging. |
 | FC-GXRLA210 Flight case for GXR-LA210A |
 | CA-GXRLA210 Transport dolly for GXR-LA210A |
 | FD-GXRLA210NL Rain cover for the back panel of the GXR-LA210A |
 | FD-GXRLA210 Nylon protection cover for either 4 GXR-LA210A cabinets |
 | GXR-GSKIT Ground stack kit to stack GXR-LA210A directly or together with the GXR-D18S |
GXR-LA210P – Passive Option
Specifications
| Components | LF: 10”, 2” voice coil, Malt Cross Cooling System HF: 1.4” Exit throat, 3” voice coil with titanium diaphragm |
| Frequency Range | 55 Hz – 20 KHz (-10dB) |
| Frequency Response | 65 Hz – 18 KHz (± 3dB) |
| Sensitivity | LF: 99 dB HF: 109 dB |
| Max. SPL / Peak* | LF: 127 dB / 133 dB HF: 128 dB / 134 dB |
| Rated Power | LF: 600W AES, 1200W program, 2400W peak HF: 80W AES, 160W program, 320W peak |
| Coverage | H: 100ºV: depending number cabinets of array |
| Crossover | Electronic FIR filters linear phase |
| Nominal Impedance | Low 8 Ω High 16 Ω |
| Connectors | 2 x Neutrik NL4 |
| Finish | Polyurea coating |
| Material | 15 mm premium birch plywood |
| Dimensions | 299 x 790 x 436 mm (H x W x D) |
| Weight | 29 Kg (63.9 lbs) |
*Calculated maximum SPL based on rated peak power and measured sensitivity.
Datasheet
Depending on the configuration, the system is amplified with the GTX Series, 4-channel, extremely high power level amplifiers with outstanding, high efficiency. They come equipped with a quality FIR-DSP with high performance 96kHz DSP processing and a large IPS display with a touch panel user interface.
Advanced Audio Power Control Management has been implemented in the design of the GTX series. This enables the user to configure the division of power between the channels via the DSP enabling them to obtain maximum power through just one single channel if desired. Optional Networking AES67 and AES3 Digital inputs are also available.
Other products from this series
2 x 18” transducers, 135 dB SPL
Active / passive available
1 x 15” transducer with a 1″ driver, 128 dB SPL
1 x 12” transducer with 1 x 1” driver, 127 dB SPL
1 x 18” transducer, 132 dB SPL
Featured references
Famous Indonesian group ‘Sheila on 7’ on GXR series
Last 14th of October the famous band Sheila on 7 performed at Jatim Fair 2018 in Surabaya, Indonesia. The main stage was equipped with…
Lynx Pro Audio at the Shanghai International Arts Festival
On October 2019, Lynx Pro Audio sound equipment was installed at the 21st edition of the International Art Festival of Shanghai “Arts Bird” and…
Seo-gu Healing Art Festival in Daejeon, South Korea
Seo-gu Healing Art Festival is held during three days in May in Daejeon, South Korea. It has a huge stage for the many shows that take place during the festival….
Shanghai Oriental Sports Center
The 2019 Super Penguin Celebrity Game has been successfully held in Shanghai by Tencent Sports, one of the most powerful live-streaming sports platforms in China…
