LX-V8
Compact line array
Compact Self-powered (Class D switch mode power supply) V-Configuration front loaded, two-way Line Array, dual 8″ neodymium transducers with nomex cones and two 1″ neodymium magnet drivers with titanium diaphragm and individual wave guide, DSP (FIR technology) controlled with 1500W amplification, 134db SPL, built-in inclinometer.
Description
Perfectly suited for:
| → Sport stadiums | |
| → Large discos | |
| → Auditoriums | |
| → Concert Halls | |
| → Outdoor events | |
| → Theatres |
Technical Data
Components | LF/MF: 2 x 8″ neodymium, custom Nomex cone |
HF: 2 x 1″ Titanium diaphragm with individual wave guides | |
| Frequency Range | 65 Hz – 20 KHz (-10dB) |
Frequency Response | 75 Hz – 18 KHz (± 3dB) |
| Max SPL | 131 dB / 134 dB |
Coverage Angle | 90º H x V according to config. |
| Power | 1500 W Class D with switching power supply |
LF Amplifier | 2 x 500 W |
| HF Amplifier | 1 x 500 W |
Processing | 56 bit Lynx dspb-22 with FIR filters |
| Control | Cabinet angle detection – temperature sensor – Fan speed – Online Control |
Control Connections | Ethernet (OCS) optional / USB (DSP programming) |
| AC Power | 230V / 115V selectable. 50/60 Hz 3A |
AC Connections | 16A Neutrik powerCon with link output |
| Finish | Polyurea coating, white colour optional (RAL) |
Material | 15 mm premium birch plywood |
| Dimensions | 260 x 908 x 505 mm (H x W x D) |
Weight | 43 kg (94 lbs) |
More features
Hardware for LX-V8
Enclosure The LX-V8 cabinet is constructed from 11-ply premium birch plywood (15mm thickness) and finished with polyurea coating | |
Internal design The internal structure of the LX-V8 is heavily braced for greater longevity and all parts are assembled on metal inserts with metric screws. The amplification modules & DSP are housed in a separate chamber to the drivers avoiding excessive heat & vibration, thus delivering greater efficiency and reliability. | |
Rear panel The powder coated steel rear panel contains all connections and houses the LX-V8s amplification modules and DSP, is easily accessible and housed separately from the drivers for increased reliability and efficiency. | |
 | Grill The LXV8 has a heavy duty, powder coated front grille with a special acoustic rear fabric to protect the transducers against dust and dirt. |
 | Handles Handles are integrated in to the side plates of the LX-V8 to facilitate transport, positioning and loading of the cabinets. |
 | Rigging Integrated flying plates are located on each side of the enclosure, to link LX-V8 cabinets together with optional splay angles, from between 0° to 6° with 0.5° step increments to create the desired curve. |
 | Transport The LX-V8 is easy to transport thanks to its dedicated Dolly. The cabinets lock in 4 points on to the dolly and a protective nylon cover is also available to protect the enclosure and keep it clean on tour. |
Components
 |
For the low-mid frequencies it uses dual 8” neodymium transducers with nomex cones and suspension. The high frequencies are looked after by two 1” neodymium magnet drivers with titanium diaphragm, each with its own individual high precision wave guide. Transducers and drivers with neodymium magnet groups. Nomex cones and suspension for the transducers, with weather protected membrane for outdoor use and ventilated voice coil for improved heat dissipation. Titanium diaphragms for the HF drivers increasing the life of the components and short copper cap for extended HF response. |
Accessories for LX-V8
 | BALL-PSR0820 Ball pin with thread for LX-V8, LX-212S and LX-218S cabinets |
 | SV-LXV8 Steel flying frame for the LX-V8, with a capacity for rigging of up to 24 cabinets |
 | SV-LXV8ALU Aluminium flying frame for the LX-V8, with a capacity for rigging of up to 24 cabinets |
 | CA-LXV8 Transport dolly for up to 6 LX-V8 |
 | SC-LXV12/8 Connection system to link LX-V12 with LX-V8 |
 | ST-LX318CV Connection system to link LX-V8 with sub LX-318C |
 | ST-LX218SV Connection system to link LX-V8 with sub LX-218S |
 | FD-1LXV8NL Rain cover for the back panel of the LX-V8 |
 | FD-4LXV8 Nylon protection cover for either 4 LX-V8 cabinets FD-6LXV8 Nylon protection cover for either 6 LX-V8 cabinets |
Amplification & DSP
Other products from this series
Delisted product
2 x 12” and 4 x 6.5” transducers with 2 x 1.4” drivers, 143 dB SPL
3 x 18” transducers (2 Frontal + 1 Rear), 141 dB SPL
Delisted product
2 x 6” transducers with a 5”x1” AMT, 127 dB SPL
Delisted product
2 x 18” transducers, offering 139 dB SPL
Delisted product
2 x 12” transducers, offering 139 dB SPL
