ADP-15
First class powered cabinet
High Output, self powered (Class D switch mode power supply), two-way cabinet.
Consists of a 15″ neodymium magnet transducer with nomex cones and a 1.4″ compression driver with a 4″ titanium diaphragm mounted on a 80ºH x 50ºV constant directivity, rotatable horn.
DSP (FIR technology) controlled with 1500W amplification, 136db SPL
Description
The versatile ADP-15 is part of the ADP Self powered, DSP integrated Series. It has been designed to offer the utmost sound reinforcement reliability, incorporating the latest acoustical and electronical technology and delivering incredible, dynamic sound.
The ADP-15 is an extremelly high power, two way full range cabinet providing exceptional performance. Each cabinet has a DSP integrated for system protection and optimization. This DSP applies classical crossover and linear phase filtering. Other features include temperature sensor, fan speed control, Ethernet options and many more.
The compact ADP-15 has an unbeatable power to size ratio, there is no need for external amplification racks, is very light weight and is the ideal solution for portable or fixed sound reinforcement. A variety of rigging options make the ADP-15 easy to set-up in minimal time. To extend the low frequency response, the ADP-18S or ADP-12S subwoofer cabinet can be used.
Perfectly suited for:
| → Theatres & auditoriums | |
| → Houses of worship | |
| → Small / middle sized clubs | |
| → Smaller Live stages / events | |
| → Front fill / side fill reinforcement | |
| → Portable sound reinforcement |
Technical Data
Components |
LF/MF: 1 x 15″ neodymium |
HF: driver 1,4″ titanium diaphragm 2.5″ voice coil |
|
| Frequency Range | 60 Hz – 20 KHz (-10dB) |
Frequency Response |
70 Hz – 18 KHz (± 3dB) |
| Max SPL | 133 dB / 136 peak |
Coverage Angle |
80º H x 50º V rotatable horn |
| Power | 1500 W Class D |
LF Amplifier |
1 x 750 W |
| HF Amplifier | 1 x 750 W |
Processing |
56 bit Lynx DSPB-22 with FIR filters |
| Cabinet adjustment | back panel LCD |
Control Connections |
XLR / Ethernet (OCS) optional, USB (DSP programming) |
| AC Power | 230V / 115V selectable. 50/60 Hz 5A |
AC Connections |
16A Neutrik powerCon TRUE1 with link output |
| Finish | Polyurea coating, black colour |
Material |
15 mm premium birch plywood |
| Dimensions | 677 x 460 x 431 mm (H x W x D) |
Weight |
39 kg (86 lbs) |
More features
Hardware for ADP-15
|
|
Enclosure The ADP-15 cabinet is constructed from 11-ply premium birch plywood (15mm thickness) and finished with polyurea coating |
|
|
Internal design The internal structure of the ADP-15 is heavily braced for greater longevity and all parts are assembled on metal inserts with metric screws. The amplification modules & DSP are housed in a separate chamber to the drivers avoiding excessive heat & vibration, thus delivering greater efficiency and reliability. |
|
|
Rear panel The powder coated steel rear panel contains all connections and houses the ADP-15 amplification modules and DSP, is easily accessible and housed separately from the drivers for increased reliability and efficiency |
 |
Grill The ADP-15 has a heavy duty, powder coated front grille with a special acoustic rear fabric to protect the transducers against dust and dirt. |
 |
Handles An ergonomic, die cast handle with firm internal grip is located on each side of the ADP-15 enclosure to facilitate transport, positioning and loading of the cabinets. One further built-in handle is located at the top of the cabinet. |
 |
Rigging
|
Components
 |
|
For the low-mid frequencies it uses one 15” (100 mm voice coil) neodymium transducer with nomex cones and suspension. The high frequencies are looked after by a 1.4” compression driver with a 4″ titanium diaphragm mounted on a 80º x 50º constant directivity rotatable horn. Transducer and driver with neodymium magnet groups. Nomex cones and suspension for the transducer with weather protected membrane for outdoor use and venti lated voice coi l for improved heat dissipation. Titanium diaphragm for the HF driver increasing the life of the components, Shorting copper cap for extended HF response mounted on a 80º x 50º constant directivity rotatable aluminium horn |
Accessories for ADP-15
 |
CS-1215
Cluster support for ADP-15
|
 |
SC-FC1
Lightweight install stud for the ADP-15
|
 |
VSM-V1
35mm speaker mounting top hat for ADP-15 with the ADP-18S or ADP-12S
|
 |
WB-03
Wall bracket for the ADP-15 for top hat insertion
|
 |
FD-ADP15NL
Rain cover for ADP-15
|
Amplification & DSP
The amplification far exceeds the transducer need thus resulting in high output, high damping factor and extremely low levels of distortion.
Other products from this series
Featured references
Live performances in Jerusalem Club
In the heart of the city of Valencia is the Jerusalem Club, one of the most popular halls of the Valencian night and perhaps the most musically diverse…
Read more
Latest installations in China by Beijing Xi Ya Linke
Here we present some of the latest installations from Beijing Xi Ya Linke, in China. Lynx Pro Audio’s professional sound systems have been permanently installed…
Read more
Seoul’s National Maritime Museum
The Seoul’s National Maritime Museum is the third lagest museum in South Korea. The museum was inaugurated on July 9 (2012) and is located in….
Read more
Multisports Vechtehalle in Schüttorf, Germany
Multisport Hall, house of the German Bundesliga Schüttorf Volleyball club. The club’s own Holmers-Kamp Stadium on Salzbergener Straße, which is managed by the city of Schüttorf, holds 5,000 spectators….
Read more
