LX-218S
High power subwoofer
High power, self-powered (Class D switch mode power supply) front loaded, subwoofer cabinet with two 18″ (4″ voice coil) low frequency neodymium transducers.
DSP controlled with 3600W amplification with PFC (Power Factor Correction), 139db SPL.
Description
The LX-218S is part of the Lynx Line Array Series and is the ideal solution for application where high precision Line Array is required. This subwoofer cabinet is the ideal combination where low frequency reinforcement is needed for the LX-V8 or LX-F6.
High power, front loaded, sub-bass cabinet with two 18″ (4” voice coil) low frequency neodymium transducers with nomex cones and suspension in direct radiation configuration. The transducers have ventilated voice coil and magnet circuit for improved heat dissipation. The system is powered with a total of 3600W of class D amplification and each cabinet has a DSP integrated. Other features include temperature sensor, fan speed control, inclinometer, Ethernet options and more.
The rugged, light weight LX-218S offers an exceptional power to size ratio, high damping factor and low distortion with a perfectly flat response from 35Hz to 125Hz. Different options frequency response available by preset.
Perfectly suited for:
| → Outdoor events | |
| → Houses of worship | |
| → Auditoriums | |
| → Large stadiums / arenas | |
| → Interior live PA | |
| → Theatres |
Technical Data
Components | 2 x 18″ (4″ voice coil) neodymium, custom Nomex cone |
| Frequency Range | 30Hz – 200Hz |
Frequency Response | 35Hz – 125Hz (± 3dB) |
| Max SPL | 136 dB / 139 dB peak |
Format | Bass reflex, Direct radiation |
| Coverage Angle | 360º single unit |
Power | 3600 W Class D with switching power supply |
| Processing | 56 bit Lynx dspb-22 |
Control | Temperature sensor – Fan Speed |
| Control Connections | Ethernet (OCS) optional / USB (DSP programming) |
AC Power | 85V – 270V. 50/60 Hz with PFC |
| AC Connections | 16A Neutrik Powercon with link output |
Finish | Polyurea coating – white colour optional (RAL) |
| Material | 18 mm premium birch plywood |
Dimensions | 532 x 1080 x 700 mm (H x W x D) |
| Weight | 72 Kg (158 lbs) |
More features
Hardware for LX-218S
Enclosure The LX-218S cabinet is constructed from 13-ply premium birch plywood (18mm thickness) and finished with polyurea coating | |
Internal design The internal structure of the LX-218S is heavily braced for greater longevity and all parts are assembled on metal inserts with metric screws. The amplification modules & DSP are housed in a separate chamber to the drivers avoiding excessive heat & vibration, thus delivering greater efficiency and reliability. | |
Rear panel The powder coated steel rear panel contains all connections and houses the LX-218S amplification modules and DSP, is easily accessible and housed separately from the drivers for increased reliability and efficiency | |
 | Grill The LX-218S has a heavy duty, powder coated front grille with special acoustic rear fabric to protect the transducers against dust and dirt. |
 | Handles Two ergonomic, die cast handles with firm internal grips are located on each side of the LX-218S enclosure to facilitate transport, positioning and loading of the cabinets. |
 | Rigging The LX-218S can be flown if chosen and comes supplied with fittings at each side so that flying plates can be added if required. |
 | Transport The LX-218S is easy to transport thanks to its dedicated Dolly. The cabinets slip in to place on the dolly and a protective nylon cover is also available to protect the enclosure and keep it clean on tour. |
Components
Two 18″ (4” voice coil) low frequency neodymium transducers with nomex cones and suspension in direct radiation configuration.
The transducers have ventilated voice coil and magnet circuit for improved heat dissipation.
Transducers with neodymium magnet groups, nomex cones and suspension prolonging the life of the components.
Interleaved sandwich voice coil, weather protected membrane for outdoor use, ventilated voice coil and magnet circuit for improved heat dissipation, double spider for improved control and linearity.
Accessories for LX-218S
 | BALL-PSR0820 Ball pin with thread for LX-V8, LX-212S and LX-218S cabinets |
 | CA-LX218S Transport dolly for up to to 3 LX-218S |
 | ST-LX218SV Connection system to link the LX-218S with line array cabinets LX-V12 or LX-V8 |
 | KV-218S 4 piece adaptator kit for flying LX-218S |
 | SV-LX218S Flying frame for the LX-218S |
 | FD-1LXV218SNL Rain cover for the back panel of the LX-218S |
 | FD-2LX218S Nylon protection cover for 2 LX-218S cabinets FD-3LX218S Nylon protection cover for 3 LX-218S cabinets |
Amplification & DSP
Bi-amplified Class D with switching power supply. Includes two 1500W power modules, one for each 18” transducer.
The amplification far exceeds the transducers needs thus resulting in high output, high damping factor and extremely low levels of distortion.
Other products from this series
Delisted product
2 x 12” and 4 x 6.5” transducers with 2 x 1.4” drivers, 143 dB SPL
Delisted product
3 x 18” transducers (2 Frontal + 1 Rear), 141 dB SPL
Delisted product
2 x 8″ transducers with 2 x 1″ drivers, 134 dB SPL
Delisted product
2 x 6” transducers with a 5”x1” AMT, 127 dB SPL
Delisted product
2 x 12” transducers, offering 139 dB SPL
