ADP-215
First class powered cabinet
High Output, self powered (Class D switch mode power supply), two-way cabinet.
Consists of two 15″ neodymium magnet transducers with nomex cones & suspension and a 1.4″ exit compression driver with titanium diaphragm, mounted on a 60ºH x 50ºV constant directivity horn.
DSP (FIR technology) controlled with 2000W amplification, 143db SPL.
Description
The versatile ADP-215 is part of the ADP Self powered, DSP integrated Series. It has been designed to offer the utmost sound reinforcement reliability, incorporating the latest acoustical and electronical technology and delivering incredible, dynamic sound.
The ADP-215 is an extremelly high power, two way full range cabinet providing exceptional performance. Each cabinet has a DSP integrated for system protection and optimization. This DSP applies classical crossover and linear phase filtering. Other features include temperature sensor, fan speed control, Ethernet options and many more.
The compact ADP-215 has an unbeatable power to size ratio, there is no need for external amplification racks, is very light weight and is the ideal solution for portable or fixed sound reinforcement. Wheels are located at the base for easy transportation and a variety of rigging options make the ADP-215 easy to set-up in minimal time. A nylon protection cover is also available. To extend the low frequency response, the ADP-18S sub-bass cabinet can be used.
Perfectly suited for:
→ Theatres & auditoriums | |
→ Houses of worship | |
→ Small / middle sized clubs | |
→ Smaller Live stages / events | |
→ Front fill / side fill reinforcement | |
→ Portable sound reinforcement |
Technical Data
Components |
LF/MF: 2 x 15″ neodymium |
HF: 1.4″ titanium diaphragm 3″ voice coil compression driver |
|
Frequency Range | 40 Hz – 20 KHz (-10dB) |
Frequency Response |
45 Hz – 18 KHz (± 3dB) |
Max SPL | 140 dB / 143 dB peak |
Coverage Angle |
60º H x 50ºV constant directivity horn |
Power amplifier | 2000W Class D |
LF/MF Amplifier |
2 x 750 W |
HF Amplifier | 1 x 500 W |
Processing |
56 bit Lynx DSPB-22 with FIR filters |
Cabinet Adjusment | Back panel LCD |
Internal Controls |
Temperature sensor, Online Control System, Fan Speed |
Control Connections | Ethernet (OCS) optional, USB (DSP programming) |
AC Power |
230V / 115V selectable. 50/60 Hz 5A |
Ac Connections | 16A Neutrik powerCON with link output |
Finish |
Polyurea coating high grade resistant paint |
Material | 15 mm Premium birch plywood |
Dimensions |
1147 x 489 x 415 mm (H x W x D) |
Weight |
52 kg (114 lbs) |
More features
Hardware for ADP-215
|
Enclosure The ADP-215 cabinet is constructed from 11-ply premium birch plywood (15mm thickness) and finished with polyurea coating |
|
Internal design The internal structure of the ADP-215 is heavily braced for greater longevity and all parts are assembled on metal inserts with metric screws. The amplification modules & DSP are housed in a separate chamber to the drivers avoiding excessive heat & vibration, thus delivering greater efficiency and reliability. |
|
Rear panel The powder coated steel rear panel contains all connections and houses the ADP-215 amplification modules and DSP, is easily accessible and housed separately from the drivers for increased reliability and efficiency |
Grill The ADP-215 has a heavy duty, powder coated front grille with a special acoustic rear fabric to protect the transducers against dust and dirt. |
|
Handles An ergonomic, die cast handle with firm internal grip is located on each side of the ADP-215 enclosure to facilitate transport, positioning and loading of the cabinets. One further built-in handle is located at the top of the cabinet. |
|
Rigging
|
|
Transport The ADP-215 has two wheels located at the rear so that it can be easily transported. A protective nylon cover is also available to protect the enclosure and keep it clean on tour.
|
Components
For the low-mid frequencies it uses two 15” (100 mm voice coil) neodymium transducers with nomex cones and suspension. The high frequencies are looked after by a 1.4” exit compression driver with titanium diaphragm, mounted on a 60ºH x 50ºV constant directivity horn. Transducers and drivers with neodymium magnet groups. Nomex cones and suspension for the transducers, with weather protected membrane for outdoor use and ventilated voice coil for improved heat dissipation. Titanium diaphragm for the HF driver increasing the life of the component, short copper cap for extended HF response. |
Accessories for ADP-215
SC-FC2
Heavyweight install stud for the ADP-215
|
|
SP-LXADP
Connection plate for ADP-215 to vertical LX-218S
|
|
FD-ADP215NL
Rain cover for the ADP-215
|
|
FD-ADP215
Nylon transparent protection cover for the ADP-215
|
Amplification & DSP
The amplification far exceeds the transducers needs thus resulting in high output, high damping factor and extremely low levels of distortion.
Other products from this series
Featured references
Live performances in Jerusalem Club
In the heart of the city of Valencia is the Jerusalem Club, one of the most popular halls of the Valencian night and perhaps the most musically diverse…
Latest installations in China by Beijing Xi Ya Linke
Here we present some of the latest installations from Beijing Xi Ya Linke, in China. Lynx Pro Audio’s professional sound systems have been permanently installed…
Seoul’s National Maritime Museum
The Seoul’s National Maritime Museum is the third lagest museum in South Korea. The museum was inaugurated on July 9 (2012) and is located in….
Multisports Vechtehalle in Schüttorf, Germany
Multisport Hall, house of the German Bundesliga Schüttorf Volleyball club. The club’s own Holmers-Kamp Stadium on Salzbergener Straße, which is managed by the city of Schüttorf, holds 5,000 spectators….